Finishing Coater

Introduction of Finishing Coater

After the initial coating, the strip is running close to the supporting roller of the equipment, and the top coating roller frame is pushed by the hydraulic cylinder against the supporting roller to close to the strip. The adjustment mechanism fine-tunes the gap between the coating roller and the supporting roller to precisely control the coating. thickness. The paint is pumped from the material box to the material pan through the pneumatic diaphragm pump. The hanging roller driven by the AC motor is soaked and stuck to the metering roller. After being leveled by the metering roller, the paint is squeezed to the coating roller, and the coating roller is evenly distributed. Coat the surface of the strip.

Structure Advantage of Finishing Coater

• The body of the roller coater can be equipped with a vertical or horizontal roller coater according to process requirements, and can also be equipped with two-roller or three-roller coating according to process requirements.

• The roller coater is equipped with an automatic or manual roller gap adjustment mechanism, and is equipped with a pressure sensor, which can effectively control the thickness of the paint film.

• The machine is equipped with a quick roll changing device and a safety protection device to ensure rapid roll change under the premise of safe operation.

• Electromechanical and hydraulic control integrated products, equipped with reliable Siemens control system and optimized process adjustment template, can effectively ensure stable product quality.